Evs XT3 MulticamLSM Version 11.01 - November 2012 Oper Manual de usuario Pagina 190

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 209
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 189
Multicam - Version 11.01 Operating Manual
EVS Broadcast Equipment SA November 2012
180
o Whenever the Last Cue button is pressed again, the speed is increased starting
from the last speed used until the maximum speed is reached.
The Last Cue parameter can be set to an individual speed (the available values
depends on the camera model).
Note
When Cues is set to Off, the cam key is displayed in black and the Mark
button is inactive.
When Cues is set to Off and Last Cue is set to Ramp Up
, press
Clear+Last Cue to reset the speed to PGMSpeed.
18.2.3 Hypermotion Secondary Menu
From the hypermotion main menu, press the MENU key to open the hypermotion
secondary menu illustrated hereunder.
# Blocks Pre-Roll PGMSpeed 2ndLever
2 00s10fr 50% +- 1000
This secondary menu lists the hypermotion settings described in the table below. To
modify a setting, press the corresponding softkey and jog to select the requested value.
Setting Description Values
# Blocks
Number of memory blocks of the hypermotion
camera to be used, if the connected camera
supports this feature.
The number of blocks displayed in the main
menu depends on the number of blocks
specified in this parameter.
1 to 4
(default: 1)
Pre-Roll
Length of the pre-roll for the cue points defined
on the material recorded from the hypermotion
camera.
The Last Cue command will go to the desired
TC - pre-roll if the material is available. If not, the
pre-roll is not applied.
From 0s01fr to
05s00fr
(default: 00s00fr)
PGMSpeed
PGM speed that is to be applied for playing back
material recorded on the hypermotion camera
using the SHIFT+PLAY keys (in %).
50, 100, 200, 300,
400, 1000 (see note)
(default: 100)
2ndLever
Secondary lever range to be applied for playing
back
material recorded on the hypermotion
camera.
0-1000, +- 1000
(default: +-1000)
Note
The 1000 value for PGMSpeed is not available for all camera models.
Vista de pagina 189
1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 208 209

Comentarios a estos manuales

Sin comentarios