Evs MulticamLSM Version 11.00 Operating Manual Manual de usuario Pagina 130

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 199
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 129
Issue
11.00.C
EVS Broadcast Equipment SA April 2012
120
F3) is only taken into account when the Advanced Audio Editing mode is enabled.
Otherwise, the audio effect duration is always locked to the video effect duration,
whatever the value of these parameters.
If the Audio effect duration parameter in the setup is set to Lock to video, it will never
be possible to adjust independently the duration of the audio and video transitions. If you
want to adjust one of these transitions and the other one follows, please check the Audio
effect duration parameter in the setup, and make sure it is NOT set to Lock to Video.
11.16.5 Associations of Audio and Video Transition Types
The following table shows the possible associations of audio and video transition effects
when the Audio effect duration parameter is not locked to the video in the Operational
Setup menu (p.3.1. F3):
Audio Effect Cut Mix Fade
from
Mute
Fade to
Mute
V Fade
to/from
Mute
Video Effect
Cut
Mix
Wipe Left -> Right
Wipe Right -> Left
Fade from color
Fade to color
V Fade (to/from Black)
11.16.6 Default Mode for Extending a Transition
Introduction
Whenever you make a video or audio split, the transition originally set is changed, which
means extended on either or both sides of the transition boundaries. In the Operational
Setup menu, use the Extend split transition parameter (p.3.2 F3) to set the default
mode for extending transition effects, this means you specify where the effect is
extended.
Vista de pagina 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 198 199

Comentarios a estos manuales

Sin comentarios