Evs MulticamLSM Version 11.00 Operating Manual Manual de usuario descargar pdf (Pagina 187)

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Issue

11.00.C

177

RECORD

This key corresponds to the ‘ARM’ or ‘REC’ commands on hypermotion cameras.

When you press RECORD for the first time, all the A/V material recorded in the memory

block(s) of the camera is deleted.

Please refer to the camera models specific features at the end of this chapter for more

information about the behavior of your camera when pressing the RECORD key on a

recording memory block.

TAKE

This key corresponds to the ‘Trig/Stop Rec’ command on hypermotion cameras.

With a single-block memory or when the last block is reached, press TAKE to stop the

recording.

With a multiple-block memory, press TAKE to stop the record on the current block and

automatically start the record on the first free block, if available.

Lever

There is no corresponding command on hypermotion cameras.

Press the Lever key to shift to the secondary lever range (defined in the 2ndLever

parameter in the hypermotion secondary menu) for material played out using the

hypermotion feature.

CAM Keys

Press a CAM key corresponding to a recorded block to load the last recorded frame of

the selected block in play mode.

If you press a CAM key corresponding to an empty block, the remote beeps.

CLEAR

Note

The CLEAR button is only active on some cameras.

Press the CLEAR key to clear the recorded material on a block. It can be used in the

following ways:

• To clear the record on a given block that is not in PLAY mode, press CLEAR and the

CAM key corresponding to the requested block.

• To clear the record on a block when the block is in PLAY mode, press CLEAR. The

PLAY is stopped, the recorded material is deleted from the block, and the camera

automatically starts recording again in this block if it is not recording on any other

block yet.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 198 199

Sin comentarios

Evs MulticamLSM Version 11.00 Operating Manual Manual de usuario Pagina 187