Evs MulticamLSM Version 11.00 Operating Manual Manual de usuario descargar pdf (Pagina 78)

Issue

11.00.C

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

9.4.4 VDR Panel - Recorder Window

The VDR Panel Recorder can be used to start/stop the record, and to create clips from

the local record trains. For example, it allows the creation of clips on a server that has no

Play channel.

How to Start/Stop the Record

Press ALT+R to start or stop the record on the record channel assigned to the window.

No confirmation is required.

Important

In LSM mode, all recorders will be stopped at once to keep the synchronization

between all record channels.

How to Create a Clip with the VDR Panel Recorder

To create a clip with the VDR Panel Recorder, proceed as follows:

1. Press ALT+I / ALT+O to mark a Short IN / Short OUT point on the last recorded

picture.

The timecode appears in the adjacent field, and the cursor is automatically placed on

that field to allow the operator to edit the timecode of the Short IN / Short OUT point if

desired. Press ENTER to confirm or ESC to cancel.

2. Repeat this operation for the complementary Short IN / OUT point.

This is not mandatory. If only a Short IN or a Short OUT point is marked, the Default

clip duration defined in the Operational Setup menu (p.2.2 F2) will be used to define

the missing point.

3. Select from which record train(s) the clip(s) must be created: press ALT+the letter

(A/B/C/D/E/F) of a record train to select / de-select it.

Letters highlighted in RED means that a clip will be created from the corresponding

record train; letters highlighted in green means that the corresponding record train is

available but will not be used to create a clip.

4. Define the name of the clip before saving it: press ALT+N, type the desired name and

validate with ENTER.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 198 199

Sin comentarios

Evs MulticamLSM Version 11.00 Operating Manual Manual de usuario Pagina 78