Evs MulticamLSM Version 11.00 Operating Manual Manual de usuario descargar pdf (Pagina 45)

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Issue

11.00.C

How to Configure the Video Delay Parameters of a Play Channel

To configure the Video Delay Parameters of a Play Channel, proceed as follows:

1. Select the play channel to configure by pressing ALT+the corresponding F_ key on

the PC keyboard (ex: ALT+F1 for PGM1, ALT+F2 for PGM2/PRV, etc)

2. If you want to use another server on the SDTI network as a source, press SHIFT + F7

on the PC keyboard to call up the network list. Use the arrow keys to select a server,

and press ENTER to validate.

3. Select the camera angle: use the left / right arrow keys, or the <TAB> key to move

the green cursor on the desired camera, the press ENTER. The new camera angle is

loaded on the channel.

4. Set the new value for the delay: use the left / right arrow keys, or the <TAB> key to

move the green cursor over the TARGET DELAY field, and enter the desired delay

value in hh:mm:ss:fr. Press CTRL+the corresponding F_ key on the PC keyboard to

activate the new delay on the selected channel (ex: CTRL + F1 start the new delay

on PGM1). If the duration of the record train is lower than the target delay, the

channel will pause on the first recorded picture until the record train is long enough

for the desired delay. In this case, the message “WAIT” is displayed on the OSD of

that channel.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 198 199

Sin comentarios

Evs MulticamLSM Version 11.00 Operating Manual Manual de usuario Pagina 45