
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
18.2.3 Hypermotion Secondary Menu
From the hypermotion main menu, press the MENU key to open the hypermotion
secondary menu illustrated hereunder.
# Blocks Pre-Roll PGMSpeed 2ndLever
This secondary menu lists the hypermotion settings described in the table below. To
modify a setting, press the corresponding softkey and jog to select the requested value.
Setting Description Values
# Blocks
Number of memory blocks of the hypermotion
camera to be used, if the connected camera
supports this feature.
The number of blocks displayed in the main
menu depends on the number of blocks
specified in this parameter.
1 to 4
(default: 1)
Pre-Roll
Length of the pre-roll for the cue points defined
on the material recorded from the hypermotion
camera.
The Last Cue command will go to the desired
TC - pre-roll if the material is available. If not, the
pre-roll is not applied.
From 0s01fr to
05s00fr
(default: 00s00fr)
PGMSpeed
PGM speed that is to be applied for playing back
material recorded on the hypermotion camera
using the SHIFT+PLAY keys.
50, 100, 200, 300,
400, 1000 (see note)
(default: 100)
2ndLever
Secondary lever range to be applied for playing
back material recorded on the hypermotion
camera.
0-1000, +- 1000
(default: +-1000)
Note
The 1000 value for PGMSpeed is not available for all camera models.
Comentarios a estos manuales